Table of Contents
Advertisement
2.
SD card slot cover [A].
3.
Make sure that a target SD card is in SD Card Slot 1 [A]. The application program is
moved to this SD card.
4.
Insert the source SD card with the application program in SD Card Slot 2 [B]. The
application program is copied from this source SD card.
5.
Turn the main power switch on.
6.
Start the SP mode.
7.
Select SP5-873-001 "Move Exec".
8.
Follow the messages shown on the operation panel.
9.
Turn the main power switch off.
10.
Remove the source SD card from SD Card Slot 2 [B].
11.
Attach the SD card slot cover.
SD Card Appli Move
41
Advertisement
Chapters
Table of Contents
Troubleshooting
