Ricoh Da-P1 Field Service Manual page 382

3. Appendices: SP Mode Tables
5846 [UCS Setting]
5-846-010 LDAP Search TOut
5-846-041 AddrB Acl Info
82
[1 to 255 / 60 / 1/step]
CTL*
Sets the length of the timeout for the search
of the LDAP server.
[- / - / -]
[Execute]
This SP must be executed immediately after
installation of an HDD unit in a basic
machine that previously had no HDD. The
first time the machine is powered on with the
new HDD installed, the system automatically
takes the address book from the NVRAM
and writes it onto the new HDD. However,
the new address book on the HDD can be
accessed only by the system administrator at
this stage. Executing this SP by the service
technician immediately after power on
grants full address book access to all users.
CTL
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data
are created on the HDD automatically.
5. However, at this point the address
book can be accessed by only the
system administrator or key operator.
6. Enter the SP mode and do
SP5846-041. After this SP executes
successfully, any user can access the
address book.