Ricoh Da-P1 Field Service Manual page 390

3. Appendices: SP Mode Tables
5-860-017 Mail Rx Interval
5-860-019 Mail Keep Setting
5-860-020 ParMail RecTOut
5-860-021 MDN ResRFC2298
5-860-022 SMTPAut FieldRep
90
[2 to 1440 / 3 / 1/ - ]
CTL*
This SP sets the timing for mail received at
regular intervals.
[ 0 to 2 / 0 / 1 /step ]
This SP setting determines whether received
mail is stored on the server.
CTL* 0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors
during receiving
[1 or 168 / 72 / 1/step]
Sets the amount of time to wait before
saving a mail that breaks up during
CTL*
reception. The received mail is discarded if
the remaining portion of the mail is not
received during this prescribed time.
[0 or 1 / 1 / 1/step]
0: No
CTL*
1: Yes
Determines whether RFC2298 compliance
is switched on for MDN reply mail.
[0 or 1 / 0 / 1/step]
0: No
1: Yes
If an SMTP authentication such as POP
CTL*
before SMTP and SMTP AUTH processes
when sending a mail, determines whether to
replace the FROM field of the header with
the account for authentication.