Ricoh Da-P1 Field Service Manual page 314

3. Appendices: SP Mode Tables
Main SP Tables-1
SP1-XXX (Feed)
[User LeadEdge Reg]
Adjusts the leading edge registration by changing the registration motor operation
timing for each mode.
1001
1-001-001 By-pass
1-001-002 Tray 1
1-001-003 Tray 2
1-001-004 Tray 3
1-001-005 Tray 4
1-001-006 Duplex
[User S-to-S Reg]
Adjusts the printing side-to-side registration from each paper feed station, using the
Trimming Area Pattern.
1002
1-002-001 By-pass
1-002-002 Tray 1
1-002-003 Tray 2
1-002-004 Tray 3
1-002-005 Tray 4
1-002-006 Duplex
14
• Increasing a value: an image is moved to the trailing edge of paper.
• Decreasing a value: an image is moved to the leading edge of paper.
• To move the start position to the right, increase the value (+).
• To move the start position to the left, decrease the value (–).
ENG*
ENG*
ENG*
[-4.0 to 4.0 / 0.0 / 0.1 mm/step]
ENG*
ENG*
ENG*
ENG*
ENG*
ENG*
[-4.0 to 4.0 / 0.0 / 0.1 mm/step]
ENG*
ENG*
ENG*