Ricoh Da-P1 Field Service Manual page 160

5. System Maintenance
Code
06 CPU clock error
10 A startup option error
has occurred.
11 An error occurred while
waiting to read the
installed SD card.
12 Configuration file error
13 The memory is
insufficient to install the
data.
14 Failed to execute system
call.
15 Failed to execute self-
update.
158
Meaning
• Turn the power off, switch DIPSW-1 on the controller to
ON, and then turn the power back on to force the ROM
data to be rewritten.
• If you cannot resolve the problem with the above steps,
replace the controller board.
• Restore the SD card for installation.
• Cycle the machine off/on.
• Restore the SD card for installation.
• Retry again with a different SD card.
• If you cannot resolve the problem with the above steps,
replace the controller board.
• Cycle the machine off/on.
• Restore the SD card for installation.
• Retry again with a different SD card.
• Reduce the number of module files to be installed.
• Cycle the machine off/on.
• Restore the SD card for installation.
• Retry again with a different SD card.
• If you cannot resolve the problem with the above steps,
replace the controller board.
• Cycle the machine off/on.
• Restore the SD card for installation.
• Retry again with a different SD card.
• If you cannot resolve the problem with the above steps,
replace the controller board.
Solution