Removing And Installing Drive Fans - Siemens SIMATIC IPC647D Operating Instructions Manual

Installation
To install the fan, follow the steps for removing it in reverse order.
6.6.3

Removing and installing drive fans

Requirement
● The device is opened.
Note
Install only a fan of the same type. Information about the original spare parts for SIMATIC
PCs is available in the Internet at After-sales information system for SIMATIC PC/PG
(http://www.siemens.com/asis).
Install the drive fan as seen in the figure. The drive fan blows cooling air into the housing.
Procedure
Note
The drive cage has been removed so that the work steps can be more easily seen.
Removal
1. Press on the clip
2. Put your hands into the
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
①
at the small
power supply plug and pull the
plug to the top from the larger
adapter plug.
indentations on the left and right
of the fan retainer and slide the
fan retainer together with the
②
drive fan up and out of the
guides.
Expanding and assigning parameters to the device
6.6 Drives and storage media
75