Siemens SIMATIC IPC647D Operating Instructions Manual page 65

Procedure - installing a memory module
1. Install the memory modules in the
2. Remove the memory module from
3. Insert the memory module in the
4. Press both sides of the memory
5. Close the device.
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
following order:
1. DIMM 2-1
2. DIMM 1-1
3. DIMM 2-2
4. DIMM 1-2
its packaging.
Hold it by the upper edges only.
Note the indicated notch during
insertion.
slot perpendicular to the
motherboard.
module evenly to avoid jamming.
The memory module latches in
audibly.
The memory module is inserted
correctly if less than 1 mm of the
gold contacts is visible evenly
across the entire length of the
module.
Expanding and assigning parameters to the device
6.4 Removing and installing memory modules
65