Managing Raid Systems; Example For A Raid1 System During The Boot Phase Of The System - Siemens SIMATIC IPC647D Operating Instructions Manual

Device maintenance and repair

7.4 Managing RAID systems

Further procedure
1. Install the bus frame.
2. Close the device.
3. When a processor is replaced, perform a BIOS update.
The microcode matching the processor is loaded in the process. The procedure is
described "Technical manual of the motherboard" document on the "Documentation and
Drivers" DVD.
7.4 Managing RAID systems
7.4.1

Example for a RAID1 system during the boot phase of the system

You can configure RAID hardware with <CTRL-I>. The associated description is available on
the "Documentation and Drivers" DVD.
104
NOTICE
Damage to the processor
If the installed processor is operated with a higher clock frequency than permitted, it can
be destroyed or cause loss of data.
Operate the processor only at a clock frequency that is equal to or less than the
permitted clock frequency.
Operating Instructions, 01/2014, A5E32996306-AA
SIMATIC IPC647D