Siemens SIMATIC IPC647D Operating Instructions Manual page 134

Technical specifications
8.5 Hardware description
Component /
interface
SATA interface
Keyboard
Mouse
Serial
Parallel
PROFIBUS/MPI
PROFINET
USB
Universal Serial Bus
Ethernet (two
interfaces)
1
2
3
4
5
134
Description
Various SATA modes,
4
AHCI, RAID 0, etc. can
be set
PS/2 keyboard interface
PS/2 mouse interface
COM1, 9-pin sub D
•
COM2, 9-pin
•
Standard, bi-directional,
EPP and ECP mode
SIMATIC S7
2
communication interface
Communication interface
2
for PROFINET
IO applications and
SIMATIC installations
USB 2.0
USB 3.0
10BaseT/100Base-
TX/1000Base-TX
Ethernet 1:
Intel
Connection (WGI210IT)
Ethernet 2:
Intel
Connection (WGI217LM)
Electrical isolation within the safety extra-low voltage circuit (SELV)
Optional product variant
Depends on the CPU type
Depends on the selected device configuration
A floppy disk drive cannot be ordered using the configurator
AMT and teaming cannot be used simultaneously on the Ethernet interface
Parameters
•
•
•
•
•
•
•
Module connector for ribbon cable, with 9-pin sub
D at slot cover
Electrically isolated
Mbps
•
•
3 high-current (500 mA) USB -2.0 ports, of those:
•
•
4 high-current (500 mA) USB -3.0 ports, of those:
•
•
•
•
•
•
Gigabit Network
®
•
•
Gigabit Network
®
•
6 interfaces
Compatible to SATA-150/300/600
Supports NCQ (Native Command Queuing)
6 connectors
Standard
Standard
V.24
compatible to CP-5622, 12
1
10/100 Mbps, electrically isolated
CP -1616 compatible 3-port interface
1 on the front
2 on the back
1 on the front
2 on the back
1 inside
10/100/1000 Mbps, electrically isolated
Wake on LAN, remote boot
AMT-capable , teaming-capable
5
Supports jumbo frames up to 9014 bytes
With teaming capability
Supports jumbo frames up to 9014 bytes
Operating Instructions, 01/2014, A5E32996306-AA
1
1
SIMATIC IPC647D