Expansion Cards; Notes On The Expansion Cards - Siemens SIMATIC IPC647D Operating Instructions Manual

6.5

Expansion cards

6.5.1

Notes on the expansion cards

Slot numbering
The 4 existing slots can be identified on the basis of the embossed numbers that are marked
in the following figure.
Note
All PCIe slots have PCIe x16 mechanics. For additional information, see Section Bus board
models (Page 153).
Information about specifications
The device is designed for use with expansion cards to PCI specification 2.3 or PCIe
specification 1.0a. PCI expansion cards with a 5 V and 3.3 V power supply can be operated.
Compliance with the defined mechanical defaults is imperative. Failure to comply with these
defaults can result in contact problems, malfunctions and assembly difficulties. The permitted
expansion card contour dimensions are specified in the section Dimension drawing of the
expansion cards (Page 122).
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
Slot 4 x PCIe device version 2 x PCIe device version 2 x PCI/2 x PCIe device version
1 PCIe Gen3 8 Lane
2 PCIe Gen3 4 Lane
3 PCIe Gen2 4 Lane
4 PCIe Gen3 4 Lane
Expanding and assigning parameters to the device
-
PCIe Gen3 4 Lane
PCIe Gen2 4 Lane
-
6.5 Expansion cards
PCIe Gen3 8 Lane
PCI
PCI
PCIe Gen3 8 Lane
67