Alarm, Error And System Messages; Power On Self Test - Siemens SIMATIC IPC647D Operating Instructions Manual

Technical specifications
8.6 BIOS description
Boot > Legacy
System parameters
Normal Boot Menu
Boot Type Order
Floppy drive
Hard Disk Drive
CD/DVD ROM Drive
USB
Others
Exit
System parameters
Profile:
8.6.7

Alarm, error and system messages

8.6.7.1

Power On Self Test

BIOS first performs a Power On Self Test (POST) within the boot routine to verify proper
operation of certain functional units of the PC. The boot sequence is interrupted immediately
if a fatal error is detected.
BIOS initializes and tests further functional units if the POST does not return any errors. In
this startup phase, the graphics controller is initialized and any error messages are output to
the screen.
The error messages output by system BIOS are listed below. For information on error
messages output by the operating system or application programs, refer to the
corresponding manuals.
178
Default settings
Standard
In the order of the
following Boot media
types:
Depending on
configuration
Depending on
configuration
Depending on
configuration
Depending on
configuration
Depending on
configuration
Default settings
Operating Instructions, 01/2014, A5E32996306-AA
Local settings
Local settings
SIMATIC IPC647D