Throttle Body - Subaru Legacy 2005 Service Manual

FUEL INJECTION (FUEL SYSTEM)

2. Throttle Body

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air intake chamber. <Ref. to
IN(H4SO 2.0)-7, REMOVAL, Air Intake Chamber.>
3) Disconnect the connectors from the throttle posi-
tion sensor and manifold absolute pressure sensor.
(A)
(A) Throttle position sensor
(B) Manifold absolute pressure sensor
4) Disconnect the engine coolant hoses from throt-
tle body.
5) Remove the bolts which install throttle body to
the intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
⋅
8 N m (0.8 kgf-m, 5.9 ft-lb)
Throttle Body
IN-00203
(B)
FU-02058
FU-02059
FU(H4SO 2.0)-10