Camshaft - Subaru Legacy 2005 Service Manual

19.Camshaft

A: REMOVAL
1) Remove the V-belts. <Ref. to ME(H4SO 2.0)-37,
REMOVAL, V-belt.>
2) Remove the crank pulley. <Ref. to ME(H4SO
2.0)-40, REMOVAL, Crank Pulley.>
3) Remove the timing belt cover. <Ref. to
ME(H4SO 2.0)-42, REMOVAL, Timing Belt Cov-
er.>
4) Remove the timing belt. <Ref. to ME(H4SO 2.0)-
43, REMOVAL, Timing Belt.>
5) Remove the cam sprocket. <Ref. to ME(H4SO
2.0)-48, REMOVAL, Cam Sprocket.>
6) Remove the crank sprocket. <Ref. to ME(H4SO
2.0)-50, REMOVAL, Crank Sprocket.>
7) Remove the timing belt cover No. 2 (LH).
8) Remove the timing belt cover No. 2 (RH).
NOTE:
Do not damage or lose the seal rubber when re-
moving the timing belt covers.
9) Remove the tensioner bracket.
10) Remove the camshaft position sensor support.
(LH side only)
11) Remove the oil level gauge guide. (LH side
only)
12) Remove the valve rocker assembly. <Ref. to
ME(H4SO 2.0)-51, REMOVAL, Valve Rocker As-
sembly.>
Camshaft
13) Remove the camshaft cap.
(1) Remove the bolts (a) and (b) in alphabetical
sequence.
(2) Equally loosen the bolts (c) through (j) all the
way in alphabetical sequence.
(3) Remove the bolts (k) through (p) in alpha-
betical sequence using ST.
ST 499497000
ME-00258
(4) Remove the camshaft cap.
ME-00259
14) Remove the camshaft.
15) Remove the oil seal.
ME(H4SO 2.0)-53
( a )
( b )
( c )
( i )
( j )
( f )
TORX PLUS
( k )
( m )
( p )
( l )
MECHANICAL
ME-00260
( e )
( g )
( h )
( d )
ME-00261
®
( o )
( n )
ME-00262
ME-00263