Fuel Filler Pipe - Subaru Legacy 2005 Service Manual

Hide thumbs Also See for Legacy 2005:
Table of Contents

Advertisement

21.Fuel Filler Pipe

A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
1) Disconnect the ground cable from battery.
2) Open the fuel filler flap lid, and remove the filler
cap.
3) Remove the screws which secure the packing.
4) Lift-up the vehicle.
5) Remove the rear wheel RH.
Fuel Filler Pipe
6) Set a container under the vehicle and remove
the drain plug from fuel tank to drain fuel from the
fuel tank.
7) Tighten the fuel drain plug.
NOTE:
Use a new gasket.
IN-00203
Tightening torque:
26 N
8) Remove the mud guard. <Ref. to EI-29, RE-
MOVAL, Mud Guard.>
9) Remove the rear sub frame. <Ref. to RS-23, RE-
MOVAL, Rear Sub Frame.>
10) Remove the bolts which hold the fuel filler pipe
bracket on the body.
FU-00095
11) Loosen the clamp and disconnect the fuel filler
hose (A) and vent hose (B) from fuel filler pipe.
FU-00096
12) Remove the fuel filler pipe to under side of the
vehicle.
FU(H4SO 2.0)-45
FUEL INJECTION (FUEL SYSTEM)
m (2.65 kgf-m, 19.2 ft-lb)
(A)
FU-01123
FU-01139
(B)
FU-01136

Advertisement

Table of Contents
loading

Table of Contents