Transmission Gear Oil - Subaru Legacy 2005 Service Manual

PERIODIC MAINTENANCE SERVICES

13.Transmission Gear Oil

A: REPLACEMENT
1. MANUAL TRANSMISSION
1) Drain the gear oil by removing drain plug.
NOTE:
• Before starting work, cool off the transmission
gear oil well.
• If transmission gear oil adheres to the exhaust
pipe, wipe it off completely.
• 5MT
• 6MT
(A) Drain plug (Oil pan side)
(B) Drain plug (Clutch housing side)
2) Replace the gasket with new one, and then tight-
en the drain plug to specified torque.
Tightening torque:
5MT
⋅
70 N m (7.1 kgf-m, 51.6 ft-lb)
6MT (Oil pan side)
⋅
44 N m (4.5 kgf-m, 32.5 ft-lb)
6MT (Clutch housing side)
⋅
70 N m (7.1 kgf-m, 51.6 ft-lb)
3) Fill the transmission gear oil through the oil level
gauge hole up to the upper point of level gauge.
Recommended gear oil:
Refer to "RM" section. <Ref. to RM-3, LUBRI-
CANTS, RECOMMENDED MATERIALS, Rec-
ommended Materials.>
Transmission Gear Oil
PM-00166
(A)
(B)
MT-00450
NOTE:
Each oil manufacturer has its base oil and addi-
tives. Thus, do not mix two or more brands.
Gear oil capacity:
5MT
3.5 2 (3.7 US qt, 3.1 Imp qt)
(A) Oil level gauge
(B) Upper level
(C) Lower level
6MT
4.1 2 (4.3 US qt, 3.6 Imp qt)
(A) Oil level gauge
(B) Upper level
(C) Lower level
PM-26
(A)
PM-00030
(A)
MT-00449
(B)
(C)
(A)
(B)
(C)