Transponder
7.14 MDS D421
MDS fixing
Degree of protection
•
•
Enclosure
•
•
•
Ambient temperature
Weight, approx.
1)
2)
3)
7.14.5
Dimension drawing
Dimensions in mm
Figure 7-39
214
In accordance with EN 60529
In accordance with DIN 40050 Part 9
Color
Material
Dimensions (D x H) in mm
(dimensions and tolerances in accordance
with DIN 69873)
During operation
Transport and storage
The values for shock and vibration are maximum values and must not be applied continuously.
The manufacturer's processing instructions must be observed.
steam jet: 150 mm; 10 to 15 l/min; 100 bar; 75 °C
Dimension drawing of MDS D421
Adhesion
;
2)
e.g. Araldit AW2101/HW2951 or 2021;
UHU-Plus endfest 300
IP67
•
IPx9K
•
3)
Pressed, impact-resistant plastic
Black
•
Epoxy casting resin
•
10 x 4.5
•
(chamfer underneath 0.5 x 45°)
–25 °C to +85 °C
–40 °C to +100 °C
4 g
System Manual, 09/2013, J31069-D0227-U001-A8-7618
SIMATIC RF200