Download
Share
Print this page
Siemens SIMATIC Ident Compact Operating Instructions
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Rfid Systems
  5. SIMATIC Ident
  6. Compact operating instructions

Siemens SIMATIC Ident Compact Operating Instructions

Transponder corner bracket for mds d160, d460 and d560
Hide thumbs Also See for SIMATIC Ident:
1
2
3
4
5

Advertisement

Quick Links

Download this manual
SIMATIC Ident
RFID systems
Transponder corner bracket for MDS D160, D460 and D560
Compact Operating Instructions
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The
notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage
have no safety alert symbol. These notices shown below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of
injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with
the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products
and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage,
installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
© Siemens AG 2017. All rights reserved
C79000-G8976-C492-01, 12/2017
1

Advertisement

loading

Related Manuals for Siemens SIMATIC Ident

Summary of Contents for Siemens SIMATIC Ident

  • Page 1 WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 2: Ordering Data

    Characteristics Transponder corner bracket Characteristics for MDS D160, D460 and D560 Area of application The transponder corner bracket can be mounted at an angle of 45° to the corner of a workpiece holder, so that the MDS Dx60 transponder attached to it can be equally processed regardless of the conveying direction (longitudinal or trans- verse conveyance).

  • Page 3: Field Data

    Field data The sensing ranges are based on the distance between the reader or antenna and the edge of the transponder corner bracket. ① Reader ② Conveyor direction ③ Transponder corner bracket for MDS D160, D460 and D560 ④ Workpiece holder Note Effect of inclined position The field geometry becomes distorted if you mount the transponder in an inclined position.

  • Page 4: Technical Specifications

    Technical specifications Table 5-1 Technical specifications of the transponder corner bracket for MDS D160, D460 and D560 6GT2690-0AN00 Product type designation Transponder corner bracket for MDS D160, D460 and D560 Mechanical specifications Material PA6-GF Color Black Remounting cycles (min.) Permitted ambient conditions Ambient temperature During operation •...

  • Page 5: Dimensional Drawings

    All dimensions in mm Trademarks All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.