Readers
5.6 SIMATIC RF290R
5.6.5
Installing the RF290R reader
5.6.5.1
Wall mounting
Use the holes in the housing to screw the device to the wall or onto a horizontal surface. The
position of the drill holes is shown in the following figure:
Figure 5-15
A: M4 threaded socket for potential connection of the reader. You will find further information
on the potential connection in the section "Further information (Page 74)".
110
Drilling pattern for the RF290R (dimensions in mm)
System Manual, 09/2013, J31069-D0227-U001-A8-7618
SIMATIC RF200