Metal-Free Area - Siemens SIMATIC Ident System Manual

Transponder
7.11 MDS D324
7.11.3

Metal-free area

h
Figure 7-23
h
a
Figure 7-24
Note
If the minimum guide values (h) are not observed, a reduction of the field data results. It is
possible to mount the MDS with metal screws (M3 countersunk head screws). This has no
tangible impact on the range.
196
≥ 25 mm
Mounting of the MDS D324 on metal with spacer
≥ 25 mm
≥ 25 mm
Flush-mounting of MDS D324 in metal with spacer
System Manual, 09/2013, J31069-D0227-U001-A8-7618
SIMATIC RF200