Toyota Tundra 2005 Service - Repair - Maintenance page 3564

ANTI-RUST TREATMENT AFTER PAINTING PROCESS
1. ANTI-RUST AGENT (WAX) APPLICATION
To preserve impossible to paint areas from corrosion, always
apply sufficient anti-rust agent (wax) to the inside of the hem-
ming areas of the doors and hoods, and around the hinges, or
the welded surfaces inside the boxed cross-section structure of
the side member, body pillar, etc.
REFERENCE: ANTI-RUST TREATMENT BY PAINTING
Painting prevents corrosion and protects the sheet metal from damage. In this section, anti-chipping paint only for anti-corro-
sion purpose is described.
1. ANTI-CHIPPING PAINT
To prevent corrosion and protect the body from damage by flying stones, etc., apply anti-chipping paint to the rocker
panel, wheel arch areas, valance panel, etc.
HINT:
Depending on the model or the application area, there are cases where the application of anti-chipping paint is necessary
before the second coat or after the top coat.
_ Apply the anti-chipping paint after
the top coat.
ANTI-RUST TREATMENT - General Information
Anti-Chipping Paint
Top Coat
Second Coat
Under coat (ED Primer)
Steel Metal
ANTI-RUST AGENT (WAX) APPLICATION
_ Apply the anti-chipping paint before
the second coat.
AR-3
Top Coat
Second Coat
Anti-Chipping Paint
Under coat (ED Primer)
Steel Metal