Toyota Tundra 2005 Service - Repair - Maintenance page 3419

AC-54
AIR CONDITIONING - COMPRESSOR AND MAGNETIC CLUTCH (1GR-FE)
REMOVAL
1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR
APPROX. 10 MINUTES
2. STOP ENGINE
3. DISCONNECT NEGATIVE (- ) TERMINAL CABLE
FROM BATTERY
4. DISCHARGE REFRIGERANT FROM REFRIGERATION
SYSTEM
5. REMOVE ENGINE UNDER COVER
6. DISCONNECT DISCHARGE HOSE
(a) Remove the nut and disconnect the discharge hose sub-
assy from the compressor and magnetic clutch.
(b) Remove the O-ring from the discharge hose sub-assy.
NOTICE:
Seal the openings of the disconnected parts using vinyl
tape to prevent moisture and foreign matter from entering.
I28953
7. DISCONNECT SUCTION HOSE
(a) Remove the nut and disconnect the suction hose sub-
assy from the compressor and magnetic clutch.
(b) Remove the O-ring from the suction hose sub-assy.
NOTICE:
Seal the openings of the disconnected parts using vinyl
tape to prevent moisture and foreign matter from entering.
I28954
8. REMOVE COMPRESSOR AND MAGNETIC CLUTCH
(a) Disconnect the connector.
(b) Remove the 4 bolts and the compressor and magnetic
clutch.
I28955
Author : Date :
AC3SF-01
5081