INSTALLATION
_ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension
diagram. (See the body dimension diagram)
_ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the
finish.
_ After welding, apply the polyurethane foam to the corresponding parts.
_ After welding, apply body sealer and under-coating to the corresponding parts.
_ After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.
POINT
1
Inspect the fitting of the back window glass etc., before welding, since this affects the appearance of the finish.
BODY PANEL REPLACEMENT
BP-35
F16957