Toyota Tundra 2005 Service - Repair - Maintenance page 3426

REMOVAL
1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR APPROX. 10 MINUTES
2. STOP ENGINE
3. DISCONNECT NEGATIVE (-) TERMINAL CABLE FROM BATTERY
4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
5. DISCONNECT DISCHARGE AND SUCTION HOSES
Remove the 2 nuts and disconnect both hoses.
NOTICE:
Cap the openings immediately to keep moisture or dirt out of the system.
6. REMOVE DRIVE BELT (See page
7. REMOVE COMPRESSOR
(a) Disconnect the connector.
(b) Remove the 4 bolts and nut.
(c) Remove the cooler bracket.
(d) Remove the compressor.
AIR CONDITIONING - COMPRESSOR AND MAGNETIC CLUTCH (2UZ-FE)
AC-18 )
Author : Date :
AC-61
AC3SL-01
5088