REMOVAL
1.
REMOVE COOLING UNIT (See page
2.
REMOVE BLOWER UNIT
(a)
Double cab:
Remove the 2 screws and motor cover.
(b)
Disconnect the connector from the blower motor.
(c)
Disconnect the air inlet damper control cable from the blower unit.
HINT:
At the time of installation, refer to the following:
After connection, adjust the control cable.
(d)
Remove the nut, bolt and blower unit.
AIR CONDITIONING
-
BLOWER UNIT
AC-31
)
Author :
Date :
AC-47
AC0CV-05
5074