Locking Out Channels; Priority - Radio Shack PRO-94 Owner's Manual

While scanning, press the number key that corresponds
to the bank you want to turn on or off. Numbers appear
at the top of the display, showing the currently selected
banks.
The scanner scans all the channels within the displayed
banks that are not locked out (see "Locking Out Chan-
nels"). The bank number flashes when the scanner
scans the channel that belongs to the bank.
Notes:
• You can manually select any channel within a
bank, even if that bank is turned off.
• You cannot turn off all banks. One bank must
always be active.

LOCKING OUT CHANNELS

You can increase the scanning speed by locking out
channels that have a continuous transmission, such as
a weather channel. To lock out a channel, manually
select the channel, then press
pears.
Note: You can still manually select locked-out chan-
nels.
To remove the lockout from a channel, manually select
the channel, then press
To unlock all channels in the banks that are turned on,
press to stop scanning, then hold down
MAN
until the scanner beeps twice.

PRIORITY

The priority feature lets you scan through the channels
and still not miss important or interesting calls on spe-
cific channels. You can program one stored channel in
each bank as a priority channel (10 for the banks in
Group A and 10 for the banks in Group B). If the priority
feature is turned on, as the scanner scans the bank, it
checks that bank's priority channel for activity every 2
seconds.
34
L-OUT(S/S)
L/O
.
L-OUT(S/S)
. L/O ap-
disappears.
L-OUT(S/S)