Turning Channel-Storage Banks On And Off; Locking Out Channels - Radio Shack PRO-162 User Manual

DLY appears and the scanner automatically adds a 2-second delay to every frequency it
stops on in that band.
Signal Stalker I also has a delay feature. It's delay time is 10 seconds.

turning channel-storage banks on and off

You can turn each channel-storage bank on and off. When you turn off a bank, the scanner
does not scan any of the 50 channels in that bank.
While scanning, press the number key that corresponds to the bank you want to turn on or
off. The scanner scans all the channels within the displayed banks that are not locked out
(see "locking out channels").
1. Press FUNC, then press
2. Press or to move the cursor in the up or the down.
3. To turn banks on or off while scanning, press the number key (1 - 9, 0) that corresponds
to the bank you want to turn on or off.
4. To exit from menu mode, press MAN.
Notes:
• You can manually select any channel within a bank, even if that bank is turned off.
• One bank must always be active. If you try to turn off all banks, the last bank remains.
programming scan bank list
You can create the scan list (up to 20 lists) that you want to scan bank. And you can scan
the scan list that you want to use it.
Press FUNC, and then press MENU to go to menu. Then press
select the scan list menu. And set the following items.
Edit Text : You can program the scan list text tag that you want.
Save scan list : You can save the scan list (up to 20 scan list) that unlocked bank now.
Load scan list : You can load the scan list (up to 20 scan list) that you want.

locking out channels

You can increase the scanning speed by locking out channels that have a continuous
transmission, such as a weather channel. To lock out a channel, manually select the
channel, and then press L/O. L/O appear.
Note: You can still manually select locked-out channels.
To remove the lockout from a channel, manually select the channel, then press L/O. L/O
disappears.
To unlock all channels in the selected banks and all signal stalker log channels for scan that
are turned on, press MAN to stop scanning, then hold down L/O until the scanner beeps
twice.
priority
The priority feature lets you scan through the channels and still not miss important or
/BANK in scan mode.
or and ENT/PGM to
12