Troubleshooting - Radio Shack PRO-94 Owner's Manual

TROUBLESHOOTING

If your PRO-94 is not working as it should, these sug-
gestions might help you eliminate the problem. If the
scanner still does not operate properly, take it to your
local RadioShack store for assistance.
Problem
Scanner is on but
will not scan.
Scanner is totally
inoperative.
The scanner's
display dims or
the scanner
sounds a tone
–
every 15 30 sec-
onds.
The keypad does
not work.
Possible Cause
SQUELCH is not
adjusted cor-
rectly.
Only one channel
or no channels
are stored.
No power.
The AC adapter
or DC adapter is
not connected.
Batteries are not
correctly
installed.
The batteries are
weak.
The keylock func-
tion is activated.
Remedy
Turn SQUELCH
clockwise.
Store frequencies
into more than
one channel.
Check the batter-
ies or make sure
the AC adapter or
DC adapter is
connected prop-
erly.
Recharge the
rechargeable bat-
teries or replace
the non-recharge-
able batteries.
Be sure the
adapter's barrel
plug is fully
plugged into the
POWER jack.
Make sure the
batteries are
installed properly.
Recharge the
rechargeable bat-
teries or replace
the non-recharge-
able batteries.
To turn off the
keylock, press
KEYLOCK until
K/L
disappears.
69