Direct Search - Radio Shack PRO-94 Owner's Manual

4. Enter the frequency that is the upper limit of the
range you want to search (including the decimal
point), then press
5. Press W to search from the upper to the lower limit,
or V to search from the lower to the upper limit.
6. When the scanner stops on a transmission, quickly
press either:
•
HOLD (A/B)
transmission.
•
MON/CLR (•)
into the current monitor memory.
7. To release the hold and continue searching, press
HOLD (A/B)
ond. Or, if you did not press
press W or V to continue searching.

Direct Search

You can search up or down from the currently displayed
frequency using direct search.
searching until the scanner stops. See Step 4.
1. Press
MAN
2. Enter the frequency you want to start from using
the number keys. (Press
point).
Notes:
• To start the search from a frequency already
stored in one of your scanner's channels, press
or
MAN
enter the channel number and then press
or
PROG
• If you enter an invalid frequency, the scanner
displays
3. Press W to search downward or V to search
upward from the selected frequency.
SEARCH
4. When the scanner stops on a transmission, quickly
press either:
•
HOLD
mission.
28
E (SVC)
to stop searching to listen to the
HOLD
to store the displayed frequency
or hold down W or V for at least 1 sec-
.
. Then use the number keys to
PROG
again.
Error.
Press
, and W or V appear.
to stop searching and listen to the trans-
HOLD appears.
again.
appears.
MON/CLR (•)
-d- appears during
• to enter a decimal
MON/CLR (•)
, simply
MAN
.
-d- ,