Selecting A Preset Fleet Map - Radio Shack PRO-94 Owner's Manual

Selecting a Preset Fleet Map

1. Set the scanner for conventional scanning and
press
PROG
store the fleet map. A previously programmed
trunked frequency appears.
2. Press a number key to select the bank to store the
fleet map.
3. Repeatedly press V or W to select
.
E
4. Press
DATA (ALT).
5. Repeatedly press V or W to select the name of the
desired map (example
grammed fleet map appears.
6. Press
E (SVC)
ner then searches for transmissions using the pre-
set map you chose.
Note: When the scanner searches for transmissions,
you see Type I fleet and subfleet IDs such as
100-9 , 000-12
How do you know if the preset map you selected is cor-
rect? Listen to find out if you are following complete
conversations. If not, try another preset map.
E1P16
Size
Block Code
0 S3
1 S10
2 S10
3 S11
4 S0
5 S10
6 S12
7 (S12)
then
TRUNK
, then press
, or 400-8 .
to select the bank to
E1 , then press
E1P7
). The prepro-
The scan-
SRC (LIMIT).
100-12
,
59