Listening To The Monitor Memories; Moving A Frequency From A Monitor; Memory To A Channel - Radio Shack PRO-94 Owner's Manual

LISTENING TO THE MONITOR
MEMORIES
To listen to the frequency stored in any one of the ten
monitor memories, press
number of the desired monitor memory (0 – 9), or re-
peatedly press
memories.
Note: To listen to the monitor memories, the priority
channel feature must be turned off (see "Priority" on
Page 34).
MOVING A FREQUENCY FROM A
MONITOR MEMORY TO A
CHANNEL
1. Press
MAN
2. Enter the number of the desired target channel
where you want to move the frequency that is
stored in the monitor memory, then press
PGM appears.
3. Press
MON/CLR (•)
the monitor memory containing the frequency.
4. Press . The frequency transfers from the monitor
E
memory into the selected channel.
MAN
to step through the monitor
MON/CLR (•)
. MAN appears.
then enter the number (1–10) of
,
MON/CLR (•)
, then the
.
PROG
31