Locking Out Channels; Cell Phone Operation - Radio Shack Racing Scanner User Manual

that channel for two seconds after the transmission stops before
resuming scanning.
3. To turn off the delay, press FUNC then DELAY while monitoring a
car number/channel.

Locking Out Channels

You can scan existing channels faster by locking out car numbers that
have continuous transmissions.
While scanning:
• Press FUNC then 0 (L/O) when the scanner stops on the number
you want to lock out.
Manually:
• Select the car number you want to lock out, then press FUNC and
0 (L/O). appears on the display.
Lo
• To remove the lock out, manually select the car number, then
press FUNC and 0 L/O.
n
Note: You cannot lock out M1 channel.

Cell Phone Operation

To answer your cell phone and talk using the scanner, you will need
a microphone headset and a cable with
end (neither included).
1. Connect the microphone headset to the A set of s / MIC jacks
on the left side of the scanner. The B set of jacks does not work
with the cell phone feature.
2. Connect the
right side of the scanner.
3. When your cell phone rings, answer it on the phone, then press
the /MON button on the scanner to clear the transmission.
4. Hang up your cell phone when you are finished talking.
disappears. Delay is ON by default.
D
appears on the display.
Lo
disappears.
Lo
/ " (3.5mm) cable to the PC/IF/PHONE jack on the
1
8
/ " (3.5mm) plugs on either
1
8
17