Setting Squelch For The Trunking Mode; Storing Trunked Frequencies - Radio Shack PRO-94 Owner's Manual

SETTING SQUELCH FOR THE
TRUNKING MODE
Your scanner's squelch setting is automatically adjust-
ed during trunking, which means it is not necessary to
manually adjust squelch while scanning trunked trans-
missions. However, the squelch setting can affect how
fast your scanner acquires the data channel, and, in
some instances, can prevent your scanner from acquir-
ing the data channel at all.
We recommend you set
fore selecting a trunked bank.
Note: Change this setting as needed for the best per-
formance in your area.
STORING TRUNKED
FREQUENCIES
Before you set up your scanner to track a trunked sys-
tem, consider the following:
• The following frequency ranges are valid for the
trunk systems indicated.
Motorola Type I and Type II system :
935.0125–939.9875 MHz
851.0000–899.9875 MHz
(except cellular frequencies)
406.0000–512.0000 MHz
137.0000–174.0000 MHz
Ericsson EDACS system :
900.0000–956.0000 MHz
806.0000–868.9875 MHz
406.0000–512.0000 MHz
137.0000–174.0000 MHz
fully clockwise be-
SQUELCH
43