A Look At The Display - Radio Shack PRO-94 Owner's Manual

A LOOK AT THE DISPLAY

The display has indicators that show the scanner's cur-
rent operating status. The display information helps you
understand how your scanner operates.
BANK A B — appears with numbers (1–10). A or B
or
indicates the bank group. The numbers show which
channel-storage banks are turned on for scanning.
TRUNK
— appears when you select the trunking opera-
tion and while you store a trunking frequency into a
channel.
(trunking channel activity bars) — each represents a
received trunking frequency or a data frequency while
trunking; they appear when you select a service search.
P — appears when you select a priority channel.
BATT. Lo — blinks when the scanner's battery is low.
DATA — appears when the data skip function is active;
appears when the disconnect tone detect function is off
in the trunking mode.
SCAN — appears when you scan channels.
LIST — appears with numbers (1–5) during trunking.
Numbers with a bar under them show which ID scan list
banks are turned on for scanning.
SEARCH — appears during limit, direct, service, and ID
searches, and blinks when you monitor IDs.
PRI — appears when the priority feature is turned on.
HOLD — appears during limit, direct, service, and ID
searches, and ID monitor holds; flashes while the scan-
ner is temporarily monitoring a programmed ID.
22