Advertisement
20-427 Owner's Manual Draft
squelch.
PC/IF – connect an optional PC interface cable here to use the scanner with your computer.
Headphone Symbol – attach headphones with 1/8" jack here.
your scanner's rear view
ANT – connect the supplied antenna or an external antenna here.
SCREW HOLE – use to mount the scanner in a car with some hardware (screw not
supplied).
RESET – press to reset your scanner.
DC 13.8V – connect a power source here.
EXT SP – connect an external speaker here.
your scanner's display
will add
install your scanner
You can mount your scanner in your vehicle, install it for mobility, or install it as a base
station.
mounting your scanner in your dashboard
If you are unsure about how to install your scanner in your vehicle, consult your automobile
manufacturer, dealer, or a qualified installer. Before installing, confirm your scanner fits in
the desired mounting area and you have all the necessary materials. Your scanner requires
a 2 x 7 1/8 x 5 5/16 inch (50 x 180 x 135 mm) mounting area.
1. Remove the four rear screws and pull off the black case before installing your scanner.
2. Install the DIN sleeve into the opening in your dashboard, lip facing out.
Page 3 of 36
Advertisement
