Advertisement
20-427 Owner's Manual Draft
3. Press FUNC then 6. L–O Fr–CL appears. Press ENT to clear all locked-out frequencies.
L–r EMPty appears. Press CLEAR to cancel the operation.
priority
In addition to the 300 programmable memory channels, the scanner has one priority
channel.
With the priority feature, you can scan through programmed channels and still not miss an
important or interesting transmission on a specific channel. When priority is turned on, the
scanner checks that channel every 2 seconds, and stays on the channel if there is activity
until the activity stops.
Note: If you program a weather channel as the priority channel, the scanner stays in the
priority channel only when the scanner detects the weather alert tone.
To program a frequency in the priority channel:
1. Press MAN.
2. Use the number keys to enter the channel number which contains the frequency you
want to program as the priority channel. Then press MAN again.
3. Press FUNC then PRI. PCH blinks and frequency (or 000.0000) appears.
4. Press ENT to store the frequency and the display blinks two times. If you want to cancel
the operation, press CLEAR.
To program the priority channel directly:
1. Press PROG.
2. Press PRI.
Page 27 of 36
Advertisement
