Advertisement
20-427 Owner's Manual Draft
3. Enter the frequency you want to enter into the priority channel, then press ENT.
To program a weather channel as the priority channel:
1. Press WX.
2. Select the weather channel you want to program as the priority channel.
3. Press FUNC then PRI. PCH flashes.
4. Press ENT to store the frequency and the display blinks two times. If you want to cancel
the operation, press CLEAR.
To turn on the priority feature, press PRI. P appears on the display while
scanning/searching (except WX band). If the scanner detects activity on the priority
channel, PCH appears. Or if the scanner detects a weather alert tone in Priority WX mode,
PCH ALErt appears for 2 seconds then ALErt flashes, and the scanner sounds an alert
tone.
Notes:
• Priority WX is only for receiving a weather alert.
• When the scanner detects a 1050 Hz alert tone, priority WX activates and you receive a
weather alert.
• If you program a weather frequency into the priority channel and the scanner detects a
weather alert tone on that frequency, the scanner sounds the alert tone.
To turn off the priority feature, press PRI.
using the attenuator
To reduce interference or noise caused by strong signals, you can reduce the scanner's
sensitivity to these signals.
Page 28 of 36
Advertisement
