Advertisement
20-427 Owner's Manual Draft
Note: Delay is automatically set as the default for each channel when you turn on the
scanner.
To turn delay on or off, press •/DELAY. When delay is on, DLY appears on the display.
locking out channels or frequencies
You can scan existing channels or search frequencies faster by locking out channels or
frequencies that have a continuous transmission, such as a weather channel.
locking out channels
To lock out a channel while scanning, press L/OUT when the scanner stops on the channel.
To lock out a channel manually, select the channel then press L/OUT. L/O appears on the
display.
Note: You can still manually select locked-out channels.
To remove the lockout from a channel, manually select the channel and press L/OUT. L/O
disappears.
reviewing locked-out channels
To review all locked out channels, press MAN. Then repeatedly alternate between pressing
FUNC and then L/OUT to view each locked-out channel.
locking out frequencies
To lock out a frequency during a search, press L/OUT when the scanner stops on that
frequency. The scanner locks out the frequency, then continues searching.
Notes:
Page 25 of 36
Advertisement
