Advertisement
20-427 Owner's Manual Draft
Group
Frequency (MHz)
1
28.0000 – 29.7000
2
50.0000 – 54.0000
3
144.0000 – 148.0000
4
420.0000 – 450.0000
manually tuning a frequency
You can manually set the scanner to move through all receivable frequencies, or select a
specific frequency as a starting point.
1. Press TUNE. The currently-tuned frequency appears. And, PSE and –t– (if zeromatic is
on) appears alternately.
2. Use the number keys to enter the frequency where you want the scanner to start.
3. Press ENT.
4. Press PAUSE or TUNE. The scanner starts the tune operation. To change the tune
direction, press /¥ or ¥/ to tune up or down. When the scanner finds an active frequency, it
stops on the frequency.
5. You can press FUNC TUNE while the scanner is stopped on a frequency in MANUAL
mode to begin the TUNE function from that frequency. For example, if the scanner is
stopped in MANUAL mode on channel 144 with frequency 145.31000 MHz, pressing FUNC
TUNE will enter TUNE mode and automatically set the TUNE frequency for 145.31000
MHz.
scanning the channels
To begin scanning channels or to start scanning again after monitoring a specific channel,
press SCAN.
Step (kHz)
5
5
5
12.5
Page 18 of 36
Advertisement
