Fill System; Water Level - GE CDT865SxJ0 Series Technical Service Manual

.83 gallons of water, and is a DC volt circuit. The
water valve is rated at 13.5 VDC, resistance is 32
is 1 minute. The water valve is located in the front
left corner, under the dishwasher. As with past
GE Dishwashers, it is secured to the left base leg
tub.
Components
Elbow
Seals
Side Fill Jets
Air Gap
Fill Hoses
Hose Clips
Water Valve

Fill System

Flood Switch

Water Level

To check for proper water level, place the
dishwasher in Service Mode and run the Fill Test
(see the Service Mode section in this service guide).
Water must reach the level shown below.
Flood Float
– 59 –
Sump
Flood
Switch
Mounting
Screw
Minimum
Water
Level