GE CDT865SxJ0 Series Technical Service Manual page 40

When installed correctly, the Floor Protect Pan is
grounded through the dishwasher structure. If it
is not installed correctly, disconnect power before
servicing the dishwasher.
Floor Protect Plan is not installed correctly and
HEATING ELEMENT, DRAIN PUMP, WASH PUMP
& FLOOR PROTECT PAN ARE INTENTIONALLY
NOT GROUNDED AND MAY PRESENT A RISK OF
ELECTRICAL SHOCK ONLY DURING SERVICING. DO
NOT CONTACT WHILE APPLIANCE IS ENERGIZED.
Floor Protect Pan Removal
1. Disconnect power to the dishwasher.
2. Remove the toe kick panel and insulation
(depending model).
3. Slide the pan to the front of the dishwasher, this
will disengage the four tabs.
4.
removed from under the dishwasher.
Floor Protect Pan Installation
1. Slide the pan under the dishwasher until the
mounting tabs are close to engaging.
2. Lift the pan upward until it contacts the base rail
tabs.
3. Slide the pan to the back of the dishwasher to
engage the tabs and lock the pan in place.
– 40 –