Silverware Wash - GE CDT865SxJ0 Series Technical Service Manual

Silverware Wash

Silverware Wash is a new feature which directs
water directly to the silverware basket. A manifold
is located inside the lower rack.
The Manifold is secured with two release tabs.
The manifold seals to the silverware wash conduit
with a bellows.
Manifold
Bellows
Silverware Conduit
The conduit is placed on a locating pin on the
back wall of the tub, and connects to the four port
diverter using the same type of tab as the main
conduit.
To remove the silverware conduit from the diverter,
push the tab and lift the conduit out of the diverter
port. It may be helpful to remove the lower spray
arm conduit.
Using rinse aid or water on the diverter seals will aid
installation.
Operation characteristics are discussed in the
Pressure Diverter section of this service guide.
– 81 –
Locating Pin
Silverware
Conduit