Front Control Console - GE CDT865SxJ0 Series Technical Service Manual

To Reassemble the Door
1. Place the outer panel face down on a protected
surface.
2. Place the inner door face up, and position six
attachment tabs into the cutouts of the outer
panel.
Outer door has cutouts to receive inner door tabs
3.
panel onto the outer panel using care making
sure the outer panel mates properly to the front
or top console. The below illustration has a
portion of the door sectioned or cut out to show
outer door panel engaged with the attach tabs
of the inner door.
4. Reinstall the screws and reinstall the door.

Front Control Console

The Front Control Console is held in place by four
tabs on the pocket handle.
Locking Tabs
Front Control Console Removal
1. Remove the door and separate the inner and
2. Push down on the pocket handle, then lift up
3. Tilt the bottom upward. When both sides are
Pocket Handle
– 32 –
outer door panels.
and away from the console on tabs to release
the console from the pocket handle.
released, rotate the console to release the tabs
at the top of the console.