Lower Rack - GE CDT865SxJ0 Series Technical Service Manual

Lower Rack

Roller Assembly
details on the lower racks.
The lower rack roller assemblies consist of brackets,
rollers, and covers (left or right, two per side) as well
as rollers (four per side).
To remove the lower rack rollers, lift up on the cover
(shaded grey in the image below) to release; then
pull out on the cover to unclip the center tabs.
Tabs in center
(shaded grey in the image below) is pushed to the
rear of the rack to remove.
part numbers and are marked L or R (left or right) on
the inside to insure proper installation.
Bracket
Rollers
Cover
Silverware Baskets
All models have a silverware basket clipped to
the bottom rack and use a feature referred to
as Silverware Wash. Please see the Circulation
System section of this service guide for more
information.
– 26 –
Left Side
Right Side