Fill System; Water Level - GE DDT595SxJ0 Series Technical Service Manual

Stainless steel tub dishwasher
Table of Contents

Advertisement

.83 gallons of water and is a DC volt circuit. The
water valve is rated at 13.5 VDC, resistance is 32
is 1 minute. The water valve is located in the front
left corner, under the dishwasher. As with past
GE Dishwashers, it is secured to the left base leg
Components
Fill Hose
Fill Cup
Gasket
Flood Switch
Water Valve

Fill System

To check for proper water level, place the
dishwasher in Service Mode and run the Fill Test
(see the Service Mode section in this service guide).
Water must reach the level shown below.
Clamp
Flood Float
– 49 –

Water Level

Sump
Flood
Switch
Mounting
Screw
Minimum
Water
Level

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents