Introduction; Tools Needed - GE CDT865SxJ0 Series Technical Service Manual

• GE's most advanced wash system delivers 65% more cleaning power to each rack
• Single Speed or Variable Speed Circulation and Drain Motors (depending on model)
• Clean Sweep Jets, Middle Spray Arm Model (PDT846SSJ only)
• Four Port Pressure Diverter allows zonal wash
• Dedicated Silverware Wash Jets
• Side Fill Jets
• New hinge allows easier door removal
• New Third Rack (some models)
• Steam Prewash (some models) loosens tough soils before any cycle, virtually eliminating the need for
soaking or pre-rinsing dishes.
• Power Dry Fan
• Piranha hard food disposer
• 80% Recyclability
Approximate Shipping Weight (lb)
Height w/ Legs Retracted (in.)
Height w/Legs Extended (in.)
Overall Width (in.)
Overall Depth (in.)
• 1/4" and 5/16" nut driver
• R2 Quadrex bit
• #20 and #25 Torx bits
• #2 Phillips head screw driver
• Adjustable wrench
• Allen wrench or hook tool (see Door Removal
section in this service guide)

Introduction

®
~ 125 pounds (depending on model)
33 3/8"
34 5/8"
23 3/4"
24"

Tools Needed

– 8 –
• Two pocket type screwdrivers
• Pliers and needle nose pliers
• Volt / Ohm meter (AC, DC, and ohms) with
"Needle" Type Probes
• Optional: Clear door (Part #: WX05X20002)