Sony DCR-IP5E/IP7E Operating Instructions Manual page 79

Adjusting the white balance
manually
To return to the FN screen
Select RETURN,
on the control button after step 4. The PAGE1
screen appears. Next, select EXIT, then press the
centre z on the control button.
To return to the automatic white
balance mode
Select AUTO, then press the centre z on the
control button in step 4.
If the picture is being taken in a studio lit by
TV lighting
We recommend that you use the n indoor
mode.
When you record under fluorescent lighting
Use the automatic white balance or hold mode.
Your camcorder may not adjust the white
balance correctly in n indoor mode.
In automatic white balance mode
Point your camcorder at the white subject for
about 10 seconds after setting the POWER switch
to CAMERA to get better adjustment when:
– You detach the battery for replacement.
– You bring your camcorder from the interior of a
house holding the exposure, and vice versa.
In hold white balance mode
Set the white balance to AUTO and reset to
HOLD after a few seconds when:
– You change the PROGRAM AE mode.
– You bring your camcorder from the interior of a
house, and vice versa.
, then press the centre z
z
z
n
z
n
79