Sony DCR-IP5E/IP7E Operating Instructions Manual page 204

Viewing images recorded on a
"Memory Stick" using your
computer
Notes
•You cannot install the USB driver if a "Memory
Stick" is not in your camcorder.
Be sure to insert a "Memory Stick" into your
camcorder before installing the USB driver.
•The USB driver has been registered incorrectly
as your computer was connected to your
camcorder before installation of the USB driver
was completed. Re-install the USB driver
following the procedure on page 204.
Image data cannot be transferred
over the USB connection
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installation of the USB driver was
completed. Perform the following procedure to
correctly install the USB driver.
Step 1 Uninstall the incorrect USB
driver
1 Turn on the power and allow Windows to
load.
2 Connect the USB jack on your computer to the
USB jack on your camcorder using the USB
cable supplied with your camcorder.
3 Insert a "Memory Stick" into your camcorder,
connect the AC power adapter, and set the
POWER switch to MEMORY.
4 Open your computer's "Device Manager".
Windows 2000 Professional:
Open "My Computer" t "Control Panel" t
"Hardware" tab, and click the "Device
Manager" button.
Other OS:
Select "My Computer" t "Control Panel" t
"System", and click "Device Manager".
5 Select "Other devices".
Select the device prefixed with a "?" mark and
delete it.
Ex: (?)Sony Handycam
6 Turn the power OFF (CHG), and then
disconnect the USB cable.
7 Reboot your computer.
204
1
2
3
4
t
5
6
7
t
t
t