Making your own titles
If you take 5 minutes or longer to enter
characters in standby mode while a cassette is
in your camcorder
The power automatically goes off. The characters
you have entered remain stored in memory. Set
the POWER switch to OFF (CHG) once and then
to CAMERA again, then complete your title.
We recommend setting the POWER switch to
VCR or removing the cassette so that your
camcorder is not automatically turned off while
you are entering title characters.
To erase the title
Select C, then press the centre z on the control
button. The last character is erased.
To enter a space
Select c, then press the centre z on the control
button.
To enter the same character on the same
button in succession
Select c, then press the centre z on the control
button to move the cursor to the next position,
and enter the character.
118
C
c
c
z
z
z