Sony DCR-IP5E/IP7E Operating Instructions Manual page 28

Step 1 Preparing the power
supply
Note
Prevent metallic objects from coming into contact
with the metal parts of the DC plug of the AC
power adaptor. This may cause a short-circuit,
damaging the AC power adaptor.
While the battery pack is being charged, the
CHG lamp flashes in the following cases:
– The battery pack is not installed correctly.
– Something is wrong with the battery pack.
When you use the AC power adaptor
Place the AC power adaptor near the mains. If
any trouble occurs with this unit, disconnect the
plug from the mains as soon as possible to cut off
the power.
Charging time/
Battery pack/
NP-FF50 (supplied)/
NP-FF50
NP-FF70
The charging time may increase if the battery's
temperature is extremely high or low because of
the ambient temperature.
Approximate number of minutes at 25°C (77°F)
needed to charge an empty battery pack
28
Full charge/
120
150