Table of Contents
Advertisement
About i.LINK
i.LINK Baud rate
The maximum baud rate of the camcorder is
"S400".
i.LINK's maximum baud rate varies according to
the equipment. Three maximum baud rates are
defined:
S100 (approx. 100 Mbps*)
S200 (approx. 200 Mbps)
S400 (approx. 400 Mbps)
The baud rate is listed under "Specifications" in
the instruction manual of each piece of
equipment. It is also indicated near the i.LINK
jack on some equipment.
The maximum baud rate of equipment, except
for this unit, on which it is not indicated is
"S100".
When units are connected to equipment having a
different maximum baud rate, the baud rate
sometimes differs from the indicated baud rate.
*What is Mbps?
Mbps stands for megabits per second, or the
amount of data that can be sent or received in
one second. For example, a baud rate of 100
Mbps means that 100 megabits of data can be
sent in one second.
i.LINK functions on this unit
For details on how to dub when this unit is
connected to other video equipment having
i.LINK (MICROMV) jacks, see page 101, 105.
This unit can also be connected to other i.LINK
compatible equipment made by SONY (e.g.
VAIO series personal computers) other than
video equipment.
Before connecting this unit to your computer,
make sure that application software supported
by this unit is already installed on your
computer.
For details on precautions when connecting this
unit, also refer to the instruction manuals for the
equipment to be connected.
Required i.LINK Cable
Use the Sony i.LINK 4-pin-to-4-pin cable (during
MPEG2 dubbing).
i.LINK and are trademarks.
234
Hide quick links:
Advertisement
Table of Contents
